Search this source-linked list of Bosch error codes using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.
Cooking-appliance codes can point to a sensor reading, control communication, airflow condition, or another model-specific issue. A range, wall oven, cooktop, and microwave may use different code systems, even within one brand. The article scope may not cover every Bosch electric cooktop model or revision.
What this list covers
Bosch electric cooktop sources and model scope
This Bosch electric cooktop list has 6 records, just above the five-record minimum for a dedicated hub. All 6 records on this page come from one bosch-home.com document, “Bosch Home · cooktop and rangetop error-code list”. That source was last checked on September 27, 2026.
4 of the 6 displays are letter-and-number displays such as F2. Copy the display character for character before comparing it with a card. Every card carries a plain-language summary of the manufacturer's description next to its source link.
There is no exact model crosswalk here. A code on this page is tied to the electric cooktop family named in the Bosch source, not to a specific model number or control revision. Bosch records for oven or microwave (2), refrigerator (3), and washer with i-DOS (3) fall below the five-record hub minimum and stay on their category pages.
Source-backed Bosch electric cooktop codes
Bosch · Electric cooktopD or E
Bosch D or E · electric cooktop display
Bosch says a D or E display on some cooktops indicates an operational fault requiring model-specific follow-up.
The display character may be ambiguous. Record the exact screen and contact Bosch if the warning returns.
Bosch · Electric cooktopdE
Bosch dE · electric cooktop display
Bosch identifies dE as demo mode on supported electric cooktops; the cooking zones do not heat in this mode.
Bosch lists separate cooktop types. Verify the appliance category before interpreting dE.
Bosch · Electric cooktopF2
Bosch F2 · electric cooktop display
Bosch lists these as overheating electronics conditions; the indicated cooking zone or zones shut off for protection.
Let the appliance cool and follow the exact manual. Stop if heat or control behavior appears abnormal.
Bosch · Electric cooktopF4
Bosch F4 · electric cooktop display
Bosch lists these as overheating electronics conditions; the indicated cooking zone or zones shut off for protection.
Let the appliance cool and follow the exact manual. Stop if heat or control behavior appears abnormal.
Bosch · Electric cooktopF5
Bosch F5 · electric cooktop display
Bosch lists an F5 heat-level or signal-tone fault family on supported cooktops.
Cooktop generations and control panels differ. Use the matching model support source.
Bosch · Electric cooktopF6
Bosch F6 · electric cooktop display
Bosch lists an F6 electronics or temperature-sensing error family for compatible electric cooktops.
The exact explanation varies by cooktop model; do not open an appliance to test sensors.
No matching code in this manufacturer article set. Check the exact display on the official support site.
Before you act
Code meanings are not universal.
Cooking appliances: Do not remove appliance panels or attempt electrical, gas, or internal repairs from a code summary. Stop using the appliance and contact its manufacturer if the source says to stop or if there is smoke, unusual heat, or a gas odor.
These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.
Confirm the exact unit
Find your Bosch model and serial number
Bosch's own guidance on where the rating label sits:
All appliances: Bosch uses an E-Nr model number and provides an appliance-specific rating-plate finder. Choose your category on the official page; do not assume one label position applies to every Bosch product.