LG d80
The dryer reports restricted exhaust airflow (80%)
Appliance category · 110 source-linked records
Dryer codes may describe the door state, a temperature reading, or restricted exhaust airflow. Start here for Samsung dryer error codes, LG dryer error codes, and Whirlpool dryer error codes, as a code family can vary by electric or gas model; each guide states its scope instead of assuming one fix fits all.
Most Searched
Smaller source groups
353GE says this fault most often means fabric-softener residue has clogged the lint filter.
This code is specific to the GE Profile UltraFast combo model family and is not a general GE dryer code.
E05Water-supply condition for the steam function in LG's dryer guide.
This meaning applies to steam-capable models. A code does not authorize disconnecting hoses or opening panels.
E21Drain-pump or slow-drain error for the wash tub on LG washer-dryer combo units.
LG distinguishes combo-unit E21 from electric-dryer vent codes. Confirm the product type and exact model.
nELG lists nE as a control-panel/Wi-Fi-module connection error and nF as a Wi-Fi-module error.
These entries concern connected models. Hardware service may be required if the manufacturer code guide says so.
nFLG lists nE as a control-panel/Wi-Fi-module connection error and nF as a Wi-Fi-module error.
These entries concern connected models. Hardware service may be required if the manufacturer code guide says so.
HC2Samsung lists HC2 as a gas-ignition error on supported dryers.
This guide does not cover gas diagnosis. If the code returns, stop and contact Samsung or a qualified gas-appliance professional.
AFRestricted-airflow code family in Whirlpool's dryer list.
Stop using a dryer if the warning recurs with unusual heat or a burning smell. Vent layout and safe cleaning depend on installation.
F4 E4Whirlpool identifies F4 E4 as a low- or no-line-voltage diagnostic that can keep an electric dryer's heater from turning on. The code describes a supply condition; it does not identify the cause on its own.
Whirlpool's checks involve the home power supply. Do not inspect wiring or terminals; use the exact installation instructions and contact a qualified electrician or Whirlpool service if the code returns.
F4E3Restricted-airflow code family in Whirlpool's dryer list.
Stop using a dryer if the warning recurs with unusual heat or a burning smell. Vent layout and safe cleaning depend on installation.
L2Low or absent line-voltage condition reported by a Whirlpool electric dryer during initial installation.
Electrical measurements and power-cord work are not included here; use a qualified electrician or Whirlpool service.
PFPower-failure code: the drying cycle was interrupted by a loss of power.
The displayed power event does not diagnose a dryer fault. Follow the exact manual if the code recurs.
Search the full source-linked directory by display, brand, or product family.
Search all code records