d75LG d75 · dryer display
Flow Sense exhaust-restriction code family; LG associates the displayed values with reported restriction levels.
LG · Dryer · 5 code records
Search this source-linked list of LG error codes using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.
Dryer codes may describe the door state, a temperature reading, or restricted exhaust airflow. A code family can vary by electric or gas model; each guide states its scope instead of assuming one fix fits all. The article scope may not cover every LG dryer model or revision.
What this list covers
This LG dryer list has 5 records, exactly the five-record minimum for a dedicated hub. All 5 records on this page come from one lg.com document, “LG Support · dryer code list”. That source was checked between September 27, 2026 and September 28, 2026.
All 5 displays are letter-and-number displays such as d75. Copy the display character for character before comparing it with a card. Every card carries a plain-language summary of the manufacturer's description next to its source link. One code here also has a longer guide, listed below the cards.
There is no exact model crosswalk here. A code on this page is tied to the dryer family named in the LG source, not to a specific model number or control revision. LG records for Dishwasher with Dynamic Heat Dry (3), steam dryer (1), washer-dryer combo (1), and smart dryer (2) fall below the five-record hub minimum and stay on their category pages.
LG says d80 can have a different interpretation on gas dryers. This summary does not diagnose gas supply or a vent installation.
The other card carries its own scope note (tE1).
d75Flow Sense exhaust-restriction code family; LG associates the displayed values with reported restriction levels.
d80Flow Sense exhaust-restriction code family; LG associates the displayed values with reported restriction levels.
d90Flow Sense exhaust-restriction code family; LG associates the displayed values with reported restriction levels.
d95Flow Sense exhaust-restriction code family; LG associates the displayed values with reported restriction levels.
tE1LG identifies tE1 as a thermistor error. Its guide recommends a power reset; if the code returns, the dryer may need service. This display does not by itself prove a specific component has failed.
Follow the reset procedure for the exact model; do not open the dryer or replace a sensor based only on the code.
No matching code in this manufacturer article set. Check the exact display on the official support site.
Longer explanations
d75 / d80 / d90 / d95 LG dryer d80, d90 and Flow Sense codes The dryer reports restricted exhaust airflowBefore you act
Dryers: Stop using a dryer if an overheating or airflow warning persists, or if you notice smoke or a burning smell. Never bypass a door interlock or thermal protection; use qualified vent or appliance service when needed.
These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.
Confirm the exact unit
LG's own guidance on where the rating label sits:
Cited documents · 1 distinct source
A check date records when the source was last reviewed for this directory. It is not a publication date or proof that the source covers every model.