Midea · Dehumidifier · 5 code records

Midea dehumidifier error codes

Search this source-linked list of Midea error codes using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.

Dehumidifier codes can describe a sensor reading, bucket position, pump condition, or system protection. These labels are not universal, and a code does not prove a specific part has failed. The article scope may not cover every Midea dehumidifier model or revision.

What this list covers

Midea dehumidifier sources and model scope

This Midea dehumidifier list has 5 records, exactly the five-record minimum for a dedicated hub. All 5 records on this page come from one midea.com document, “Midea Support · all dehumidifiers FAQ”. That source was last checked on September 28, 2026.

3 of the 5 displays are letter-only displays such as AS, and 2 are letter-and-number displays such as E3. Copy the display character for character before comparing it with a card. Every card carries a plain-language summary of the manufacturer's description next to its source link.

There is no exact model crosswalk here. A code on this page is tied to the dehumidifier family named in the Midea source, not to a specific model number or control revision.

Source-backed Midea dehumidifier codes

Midea · DehumidifierAS

Midea AS · dehumidifier display

Midea lists AS as a humidity-sensor error on its dehumidifiers.

This is Midea's dehumidifier FAQ guidance. If the display persists, use the exact model's support route rather than replacing a part based on the code alone.

Midea · DehumidifierE3

Midea E3 · dehumidifier display

Midea describes E3 as a unit malfunction on its dehumidifiers.

Midea's FAQ gives a broad malfunction label rather than identifying a failed part. Contact support if the model-specific guidance does not clear the display.

Midea · DehumidifierEb

Midea Eb · dehumidifier display

Midea says Eb means the bucket is removed or not positioned correctly on pump-equipped models.

Midea limits this meaning to units with a pump feature. Check the exact model configuration before following bucket instructions.

Midea · DehumidifierES

Midea ES · dehumidifier display

Midea lists ES as an evaporator-tube temperature-sensor error on its dehumidifiers.

This meaning comes from Midea's dehumidifier FAQ and is not a universal appliance code or a part-failure diagnosis.

Midea · DehumidifierP2

Midea P2 · dehumidifier display

Midea says P2 means the bucket is full or not positioned correctly on models without a pump feature.

Midea limits this interpretation to units without the pump feature. Check the exact model configuration and owner's manual.

Before you act

Code meanings are not universal.

Dehumidifiers: Do not open the unit or attempt sealed-system, refrigerant, or electrical work. Stop if the appliance leaks near an outlet, overheats, or has a damaged power cord, and use manufacturer support.

These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.

Confirm the exact unit

Find your Midea model and serial number

This directory does not yet hold a Midea-published rating-label location for the dehumidifier. Check the owner's manual or Midea support, and do not move the appliance or remove panels to reach a label.

Cited documents · 1 distinct source

Midea dehumidifier source documents

A check date records when the source was last reviewed for this directory. It is not a publication date or proof that the source covers every model.