0CSamsung 0C · dishwasher display
Over-level water error: more water is detected in the dishwasher than expected.
If water is visible outside the appliance, stop and contact Samsung. Do not treat the code as proof that a reset is safe.
Samsung · Dishwasher · 25 code records
Search this source-linked list of Samsung error codes using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.
Dishwasher codes can concern water entering, leaving, or being detected where it should not be. Similar labels can mean different things across makers, so match the manufacturer and model before using any instructions. The article scope may not cover every Samsung dishwasher model or revision.
What this list covers
This page collects 25 source-linked displays for the Samsung dishwasher family. All 25 records on this page come from one samsung.com document, “Samsung Support · dishwasher code guide”. That source was last checked on September 27, 2026.
14 of the 25 displays are letter-only displays such as bE, and 11 are number-and-letter displays such as 0C. Copy the display character for character before comparing it with a card. Every card carries a plain-language summary of the manufacturer's description next to its source link. One code here also has a longer guide, listed below the cards.
There is no exact model crosswalk here. A code on this page is tied to the dishwasher family named in the Samsung source, not to a specific model number or control revision. Samsung records for gas dryer (1) and Family Hub refrigerator (4) fall below the five-record hub minimum and stay on their category pages.
0COver-level water error: more water is detected in the dishwasher than expected.
If water is visible outside the appliance, stop and contact Samsung. Do not treat the code as proof that a reset is safe.
1ECode meaning depends on dishwasher type: Samsung lists a WaterWall filter issue on WaterWall models and a high-temperature-heater error on rotary models.
This is intentionally model-scoped; identify whether the dishwasher uses a WaterWall or rotary wash system before interpreting the code.
3CPump-operation error.
The display does not make an owner-level pump diagnosis. Use Samsung's support path if the error remains.
3EHigh-temperature water-supply error.
Samsung assigns this meaning to its dishwasher line; do not reuse a washer interpretation for the same characters.
4CWater-supply pressure or temperature is outside the dishwasher's expected range.
Use the dishwasher's own manual; a matching washer code has a different appliance context.
4EWater-supply pressure or temperature is outside the dishwasher's expected range.
Use the dishwasher's own manual; a matching washer code has a different appliance context.
5CDrain error: Samsung says the dishwasher cannot drain.
Drain arrangements and owner-accessible filters vary by model. Do not pull out a built-in dishwasher for a general code check.
5EDrain error: Samsung says the dishwasher cannot drain.
Drain arrangements and owner-accessible filters vary by model. Do not pull out a built-in dishwasher for a general code check.
6EThe control panel detects a stuck button.
The exact control layout varies; stop if a key or panel appears physically damaged.
7EWaterWall reflector error; the reflector is not moving as expected.
This meaning applies to WaterWall models; other Samsung dishwasher designs may not use that component.
9ELow-water-level error: Samsung says there is not enough water in the dishwasher.
Use the model-specific manual if this repeats. A code does not identify whether supply or an internal component is responsible.
bEThe control panel detects a stuck button.
The exact control layout varies; stop if a key or panel appears physically damaged.
CECommunication error: the control panel cannot communicate with the rest of the dishwasher.
If the code returns, use Samsung service rather than opening the control panel.
HCHigh-temperature heater error; Samsung says the dishwasher temperature is too high.
This is a dishwasher-specific meaning and should not be inferred from a washer or dryer HC code.
HEHeater error: the dishwasher temperature is being detected incorrectly.
This code is not a stand-alone heater diagnosis; use the exact model support path if it recurs.
IECode meaning depends on dishwasher type: Samsung lists a WaterWall filter issue on WaterWall models and a high-temperature-heater error on rotary models.
This is intentionally model-scoped; identify whether the dishwasher uses a WaterWall or rotary wash system before interpreting the code.
LCLeakage error: Samsung says the dishwasher leak sensor detected moisture. WaterWall models may also report a blocked reflector.
This is a stop-and-support code. Do not run another cycle or pull a built-in unit to look for hidden water.
LELeakage error: Samsung says the dishwasher leak sensor detected moisture. WaterWall models may also report a blocked reflector.
This is a stop-and-support code. Do not run another cycle or pull a built-in unit to look for hidden water.
OCOver-level water error: more water is detected in the dishwasher than expected.
If water is visible outside the appliance, stop and contact Samsung. Do not treat the code as proof that a reset is safe.
oEOver-level water error: more water is detected in the dishwasher than expected.
If water is visible outside the appliance, stop and contact Samsung. Do not treat the code as proof that a reset is safe.
PCZone Wash function error.
The function and control layout are model-dependent. Use the matching owner manual or Samsung support.
PEHalf-load function error.
The meaning applies to supported half-load models; a service check may be needed if it persists.
SCDrain error: Samsung says the dishwasher cannot drain.
Drain arrangements and owner-accessible filters vary by model. Do not pull out a built-in dishwasher for a general code check.
SEDrain error: Samsung says the dishwasher cannot drain.
Drain arrangements and owner-accessible filters vary by model. Do not pull out a built-in dishwasher for a general code check.
tETemperature-sensor error: the dishwasher temperature is being detected incorrectly.
No sensor replacement or internal testing is recommended from this general summary.
No matching code in this manufacturer article set. Check the exact display on the official support site.
Longer explanations
LC / LE Samsung dishwasher LC or LE error code The leak sensor has detected moistureBefore you act
Dishwashers: A leak or water-protection warning can involve hidden water near electrical parts. Do not pull the unit from cabinetry, remove panels, or run another cycle to locate a leak.
These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.
Confirm the exact unit
Samsung's own guidance on where the rating label sits:
Source: Samsung Support US · Product-specific model-number guides
Cited documents · 1 distinct source
A check date records when the source was last reviewed for this directory. It is not a publication date or proof that the source covers every model.