drnWhirlpool drn · top-load HE washer display
Whirlpool says the top-load HE washer is not draining properly.
Installation and drain procedures vary. Use the manual for the exact washer model.
Whirlpool · Top-load HE washer · 8 code records
Search this source-linked list of Whirlpool error codes using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.
Washer codes often describe what the control detected during filling, draining, door locking, or spin. The letters are not universal: start with the washer brand and full code, then check whether the guide covers your product family. The article scope may not cover every Whirlpool top-load HE washer model or revision.
What this list covers
This page collects 8 source-linked displays for the Whirlpool top-load HE washer family. All 8 records on this page come from one producthelp.whirlpool.com document, “Whirlpool Product Help · top-load washer code table”. That source was last checked on September 27, 2026.
6 of the 8 displays are letter-only displays such as drn. Copy the display character for character before comparing it with a card. Every card carries a plain-language summary of the manufacturer's description next to its source link.
There is no exact model crosswalk here. A code on this page is tied to the top-load HE washer family named in the Whirlpool source, not to a specific model number or control revision. Whirlpool records for dryer (3) and electric dryer (2) fall below the five-record hub minimum and stay on their category pages.
drnWhirlpool says the top-load HE washer is not draining properly.
Installation and drain procedures vary. Use the manual for the exact washer model.
F8 E1Whirlpool says the top-load HE washer is taking too long to fill or sensing insufficient water flow.
Match the model and exact display. Do not remove or modify anti-flood devices based on a code summary.
HCHot and cold inlet hoses are reversed on the Whirlpool top-load HE washer.
Turn off the water supply before any hose work; if connections are hidden or leaking, request service.
LdLWhirlpool says the washer lid is not locking.
Do not bypass a lid lock. Check only visible obstructions and use the exact model manual.
LdUWhirlpool says objects on the washer lid are preventing it from unlocking.
Do not force the lid. If it remains locked, use the owner's manual or service support.
LFWhirlpool says the top-load HE washer is taking too long to fill or sensing insufficient water flow.
Match the model and exact display. Do not remove or modify anti-flood devices based on a code summary.
Lo FLWhirlpool says the top-load HE washer is taking too long to fill or sensing insufficient water flow.
Match the model and exact display. Do not remove or modify anti-flood devices based on a code summary.
OfbWhirlpool lists Ofb as an out-of-balance load condition.
This indicates a load-balance condition, not a confirmed component failure. Use the exact load guidance in the manual.
No matching code in this manufacturer article set. Check the exact display on the official support site.
Before you act
Washers: Do not move a heavy washer, force a locked door, or open electrical areas to investigate a code. Stop if water reaches an outlet or the machine moves or shakes violently.
These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.
Confirm the exact unit
Whirlpool's own guidance on where the rating label sits:
Source: Whirlpool Product Help · Model and Serial Number Locations
Cited documents · 1 distinct source
A check date records when the source was last reviewed for this directory. It is not a publication date or proof that the source covers every model.