| Code | What the source says | Safe first check | Stop if |
|---|---|---|---|
| 4C / 4E | Samsung's washer error-code guide lists 4C, 4E, and nF as a not-filling error: water is not entering the washer correctly. | Confirm whether the display reads 4C, 4E, or nF and record the washer's model number. A display ending in 2, such as 4C2 or 4E2, is a different hot/cold supply error that this guide does not cover. | Stop if a hose, valve, or connection is leaking. |
What the display tells you
What does Samsung 4C / 4E mean?
According to Samsung Support · 4C / 4E: Samsung's washer error-code guide lists 4C, 4E, and nF as a not-filling error: water is not entering the washer correctly. The code points to a water-supply condition; it does not confirm a specific part failure.
This is the condition described by the maker—not a remote diagnosis of your appliance. A code can point to a system or symptom without confirming which part, if any, needs replacement.
What can I safely check first?
Begin with what you can see and with instructions for the exact model. Do not skip the maker's cautions to clear the display faster.
- Confirm whether the display reads 4C, 4E, or nF and record the washer's model number. A display ending in 2, such as 4C2 or 4E2, is a different hot/cold supply error that this guide does not cover.
- Samsung says to make sure both the hot and cold supply hoses are connected to the matching inlets (hot to hot, cold to cold) and are not bent or kinked. The hot line must be connected even if you only use cold cycles, and Samsung says not to use Flood Safe hoses.
- Open both water valves completely and leave them open while the washer runs.
- Samsung also lists the drain hose: it should not be kinked and should sit 6 to 8 inches into the drain pipe. Do not remove the screw on the back of the washer that holds the drain hose.
- Samsung's next step is to unplug the washer or switch off its circuit breaker for 1 minute, then restore power and run a cycle.
- Samsung describes cleaning the inlet filters for debris by turning off the water and disconnecting the supply hoses. Only do this if you can reach the hoses without moving or tipping the washer; otherwise leave it to a technician.
When should I stop and call for service?
Stop if a hose, valve, or connection is leaking. If the supply is on and visible hoses are clear but the code persists, use Samsung's model-specific troubleshooting or arrange service.
Why does the model number matter?
Samsung notes that code displays and troubleshooting steps vary by model. Check the model-specific support page before ordering parts or opening the washer. The 4C2/4E2 hot/cold error has its own entry in Samsung's guide and is not covered here.
Look for the full model identifier in the owner's paperwork or on a label that is safely visible without moving, tipping, or opening the appliance. Use that identifier when you open the manufacturer source below.
Which manufacturer source supports this?
This summary is based on the linked manufacturer guidance. The source is the authority for product-specific instructions; ErrorCodeDecoder is an independent reference and is not affiliated with Samsung.
Source checked October 31, 2026. We link to the original so you can confirm the latest model-specific instructions.
Spotted an outdated source or inaccurate detail? Report a correction ↗
Common questions
Frequently asked questions about Samsung 4C / 4E
- What does code 4C mean on a Samsung washer?
- Samsung describes 4C as a not-filling error: water is not entering the washer correctly. Its first checks are hoses on the matching hot and cold inlets without kinks, both water valves fully open, and a 1-minute power cycle.
- Is Samsung washer code 4C the same as 4E?
- Samsung's error-code guide lists 4C, 4E, and nF together as the same not-filling error. 4C2 and 4E2 are different: Samsung lists them as a hot/cold supply error.